- Description
- Specification
- Installation
- Warranty
- Measure
These doors are available in woodgrain finish and are virtually maintenance free.
Door finishes:
White
Magnolia
Bleached Oak
Red Mahogany
Dark Mahogany
Light Oak
Dark Oak
Irish Oak
Honey Beech
Teak
Rosewood
Golden Brown
Ebony
Anthracite Grey
Green
Blue
Red
Gloss Magnolia
Due to the production processes door colours may vary. Should you require matching doors then please specify on the order.
Chassis colour - Traffic White (RAL 9016) for Gloss White Doors, Black (RAL 9005) for Ebony coloured doors and Brown (RAL 8028) for all other timber effect GRP doors. We also offer an Anthracite chassis (RAL 7016) to match Anthracite Grey GRP door colours (please specify on the order).
The doors are made as an infill and then fixed into rigid box section chassis to provide a very stable door construction that will not twist or warp.
They are provided as standard with a flow-coat to the inside face for a smoother finish and reduced translucency.
Please Note: Panel doors are produced with appearance in mind. This may result in some small gaps which could allow water ingress especially in exposed locations.
Retractable Gear - The retractable gear allows the door to be retracted inside the garage when open by means of horizontal overhead tracks supported by wall or ceiling mounted suspension brackets. This gear is available as an option for single doors and comes as standard with double garage doors.
The nominal drive through clearance is 105mm less than the opening width and 110mm less than the opening height for single doors and 140mm less than the opening height for double doors.
Please Note:
The Frame Options are as follows: -
For all GRP White Gloss Doors a White Frame RAL 9016 will be as standard. Ebony Doors will have a Black Frame RAL 9005 as standard and any other coloured doors will have a Brown RAL 8028 Frame as standard. Garador do not offer frames to match door colour.
Installation Instructions are provided with every door.
2-year Warranty on the door panels.
10-year Warranty on the door mechanism and steel frame.
The Warranty does not cover damage caused through:
> Normal wear and tear
> Improper installation
> Negligent care and maintenance
> Improper initial and subsequent operation
> Negligent or wanton destruction
> External influences such as fire, water, salts, alkaline solutions, acids, abnormal environmental influences
> Mechanical damage through improper transport and fitting
> Priming and other surface protection treatments
> Repair by non-qualified persons
> Using non-Garador parts without the approval of the Manufacturer
> Remove of the product number or making it unidentifiable
| Size Code | Internal Frame Size (On-site timber frame) width x height (mm x mm) |
Frame kit for double door Overall frame sizes shown* width x height (mm x mm) |
| 1076 | 3049 x 2286 | 3189 x 2344 |
| 1166 | 3354 x 1981 | 3494 x 2039 |
| 1170 | 3354 x 2136 | 3494 x 2194 |
| 1176 | 3659 x 2286 | 3494 x 2344 |
| 1266 | 3659 x 1981 | 3799 x 2039 |
| 1270 | 3659 x 2136 | 3799 x 2194 |
| 1276 | 3964 x 2286 | 3799 x 2344 |
| 1366 | 3964 x 1981 | 4104 x 2039 |
| 1370 | 3964 x 2136 | 4104 x 2194 |
| 1376 | 3964 x 2286 | 4104 x 2344 |
| 1466 | 4269 x 1981 | 4409 x 2039 |
| 1470 | 4269 x 2136 | 4409 x 2194 |
| 1476 | 4574 x 2286 | 4409 x 2344 |
| 1566 | 4574 x 1981 | 4714 x 2039 |
| 1570 | 4574 x 2136 | 4714 x 2194 |
| 1576 | 4879 x 2286 | 4714 x 2344 |
| 1666 | 4879 x 1981 | 5019 x 2039 |
| 1670 | 4879 x 2136 | 5019 x 2194 |
* No fitting clearance allowed. If door is fitted between the brickwork a minimum of 10mm clearance over the width and 5mm over the height should be added to the overall frame size when selecting the door.
